PNG  IHDR pHYs   OiCCPPhotoshop ICC profilexڝSgTS=BKKoR RB&*! J!QEEȠQ, !{kּ> H3Q5 B.@ $pd!s#~<<+"x M0B\t8K@zB@F&S`cbP-`'{[! eDh;VEX0fK9-0IWfH  0Q){`##xFW<+*x<$9E[-qWW.(I+6aa@.y24x6_-"bbϫp@t~,/;m%h^ uf@Wp~<5j>{-]cK'Xto(hw?G%fIq^D$.Tʳ?D*A, `6B$BB dr`)B(Ͱ*`/@4Qhp.U=pa( Aa!ڈbX#!H$ ɈQ"K5H1RT UH=r9\F;2G1Q= C7F dt1r=6Ыhڏ>C03l0.B8, c˱" VcϱwE 6wB aAHXLXNH $4 7 Q'"K&b21XH,#/{C7$C2'ITFnR#,4H#dk9, +ȅ3![ b@qS(RjJ4e2AURݨT5ZBRQ4u9̓IKhhitݕNWGw Ljg(gwLӋT071oUX**| J&*/Tު UUT^S}FU3S ԖUPSSg;goT?~YYLOCQ_ cx,!k u5&|v*=9C3J3WRf?qtN (~))4L1e\kXHQG6EYAJ'\'GgSSݧ M=:.kDwn^Loy}/TmG X $ <5qo</QC]@Caaᄑ.ȽJtq]zۯ6iܟ4)Y3sCQ? 0k߬~OCOg#/c/Wװwa>>r><72Y_7ȷOo_C#dz%gA[z|!?:eAAA!h쐭!ΑiP~aa~ 'W?pX15wCsDDDޛg1O9-J5*>.j<74?.fYXXIlK9.*6nl {/]py.,:@LN8A*%w% yg"/6шC\*NH*Mz쑼5y$3,幄'L Lݛ:v m2=:1qB!Mggfvˬen/kY- BTZ(*geWf͉9+̳ې7ᒶKW-X潬j9(xoʿܔĹdff-[n ڴ VE/(ۻCɾUUMfeI?m]Nmq#׹=TR+Gw- 6 U#pDy  :v{vg/jBFS[b[O>zG499?rCd&ˮ/~јѡ򗓿m|x31^VwwO| (hSЧc3- cHRMz%u0`:o_F@8N ' p @8N@8}' p '#@8N@8N pQ9p!i~}|6-ӪG` VP.@*j>[ K^<֐Z]@8N'KQ<Q(`s" 'hgpKB`R@Dqj '  'P$a ( `D$Na L?u80e J,K˷NI'0eݷ(NI'؀ 2ipIIKp`:O'`ʤxB8Ѥx Ѥx $ $P6 :vRNb 'p,>NB 'P]-->P T+*^h& p '‰a ‰ (ĵt#u33;Nt̵'ޯ; [3W ~]0KH1q@8]O2]3*̧7# *p>us p _6]/}-4|t'|Smx= DoʾM×M_8!)6lq':l7!|4} '\ne t!=hnLn (~Dn\+‰_4k)0e@OhZ`F `.m1} 'vp{F`ON7Srx 'D˸nV`><;yMx!IS钦OM)Ե٥x 'DSD6bS8!" ODz#R >S8!7ّxEh0m$MIPHi$IvS8IN$I p$O8I,sk&I)$IN$Hi$I^Ah.p$MIN$IR8I·N "IF9Ah0m$MIN$IR8IN$I 3jIU;kO$ɳN$+ q.x* tEXtComment

Viewing File: /lib/kernel/install.d/10-devicetree.install

#!/usr/bin/bash

# set -x

if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]
then
COMMAND="$1"
KERNEL_VERSION="$2"
#BOOT_DIR_ABS="$3"
#KERNEL_IMAGE="$4"

[ -f /etc/u-boot.conf ] && source /etc/u-boot.conf || true
[ -z "$FIRMWAREDT" ] || FirmwareDT=$FIRMWAREDT

if [[ $FirmwareDT == "True" ]]
then
	# if we want to use firmware DT we remove symlink to current kernel DT
        if [ -h /boot/dtb ]; then
            rm -f /boot/dtb
        fi
	exit 0
fi

# Setup a /boot/dtb -> /boot/dtb-$newest_kernel_version symlink so that
# u-boot can find the correct dtb to load.
#
# If invoked to 'add' a new kernel, find the newest based on `sort`ing
# the kernel versions dtb.  If 'remove', then follow basically the same
# procedure but exclude the version currently being removed.
#
# The theory of operation here is that, while newer kernels may add new
# dtb nodes and fields, as upstreaming hw support for some particular
# device progresses, it should never make backward incompatible changes.
# So it should always be safe to use a newer dtb with an older kernel.

    list_dtb_versions() {
        excluded_version="$1"
        for dtbdir in /boot/dtb-*; do
            dtbver=${dtbdir#*-}
            if [ "$dtbver" != "$excluded_version" ]; then
                echo $dtbver
            fi
        done
    }

    setup_dtb_link() {
        ver=`list_dtb_versions $1 | sort -r --sort=version | head -1`
        if [ -h /boot/dtb ]; then
            rm -f /boot/dtb
        fi
        ln -s dtb-$ver /boot/dtb
    }

    ret=0
    case "$COMMAND" in
        add)
            # If we're adding a kernel we want that version
            if [ -h /boot/dtb ]; then
                rm -f /boot/dtb
            fi
            ln -s dtb-$KERNEL_VERSION /boot/dtb
            ret=$?
            ;;
        remove)
            setup_dtb_link $KERNEL_VERSION
            ret=$?
            ;;
    esac
    exit $ret
else
    # Just exit on non ARM
    exit 0
fi
Back to Directory=ceiIENDB`